5050 CONTROL UNIT
Technical Manual & Cabling Instructions
19.10.2012
Epec Oy reserves all rights for improvements without prior notice
Epec Oy Postiosoite/Postal address Puhelin/Phone Fax Internet
Tiedekatu 6 PL/P.O.Box 194 +358-(0)20-7608 111 +358-(0)20-7608 110 www.epec.fi
FIN-60320 Seinäjoki FIN-60101 Seinäjoki, Finland
Versatile I/O capabilities
• Total of 65 I/O pins
• Most pins have multipurpose features
• All the I/O pins are equipped with a short-circuit protection
• Pulse inputs have a threshold voltage selection
• PWM outputs have a high side current measurement
• Some pins with an input feature have a programmable pull up / pull down selection
Application programming
• Application downloading is possible through both CAN bus and Ethernet
• Floating point calculation makes programming more efficient
• Epec products are based on PLCopen and CANopen®, which make them easily
scalable to meet the requirements for both small and large machines
• Open I/O and communication interface, thus making it possible to connect
• sensors
• actuators
• joysticks
• other devices
from other manufacturers to optimize the whole machine environment, both technically
and ergonomically.
• Internal error logging which makes it possible to
• save e.g. overvoltage and overtemperature alarms
• program customized log applications
To Next Page
