EPS NEXUS Manual V1.5.2 EN WWW.EPSBV.EU 44
1. Choose ‘backwash configuration’.
1. Configure the valve in question and press 'confirm'.
1. Semi-automatic is a manual six-way valve and an automation of the filter pump.
2. Pneumatic valves are besgo and provalve valves and can be combined with an electric sewer valve and/or
pneumatic rinse/rinse valve.
3. Autovalve is the fully automatic six-way valve from EPS. This can be placed on almost all standard six-way valves
and can be combined with an electric sewer valve.
2. Based on the choice in step 4, subsequent options are shown. Choose what applies and press 'confirm'
3. Image with text, screenshot, iPod, electronics Automatically generated description
5.8.1 Backwash settings:
The settings of the backwash control can be changed in the settings menu.
In the event of a backwash action, these parameters will be observed:
1. Pumping speed backwash.
2. Backwash duration – Here the desired duration of a backwash can be set.
3. Rinse duration or rinse duration – Here the desired duration of a rinse can be set. The speed of a rinse is always at
medium speed. This is best for rinsing; If the flush is insufficient, the duration should be extended.
To Next Page
Loading...