Cleaning the Media Feed Rollers for the attachment (AcuLaser CX16NF only)
Be sure to remove the duplex option before cleaning the media feed rollers for the attachment.
1. If the duplex option is installed, remove it.
2. Remove the dust cover from Tray 1 and close the tray.
3. Lift the machine off of the attachment and temporarily place it on a sturdy flat surface.
4. Clean the media feed rollers by wiping them with a soft, dry cloth.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Maintenance 143
To Next Page
Loading...
Need help?
General
