See Also:
❏ “Loading Print Media in the Multipurpose Feeder (MPF)” on page 119
❏ “Loading Print Media in the Priority Sheet Inserter (PSI)” on page 127
❏ “Loading Envelope in the Multipurpose Feeder (MPF)” on page 124
❏ “Loading Envelope in the Priority Sheet Inserter (PSI)” on page 129
❏ “Printing on Custom Size Paper” on page 146
Automatic Document Feeder (ADF) Guidelines (Epson AcuLaser CX17NF/
CX17WF Only)
The ADF accommodates the following original sizes:
❏ Width: 148–215.9 mm (5.83–8.50 inches)
❏ Length: 210–355.6 mm (8.27–14.00 inches)
The weight range includes 60–105 gsm.
Follow these guidelines when loading original documents into the ADF:
❏ Load documents face up so that the top of the document enters the printer first.
❏ Place only loose sheets of paper in the ADF.
❏ Adjust the document guides so that they fit against the documents.
❏ Insert paper in the document feeder tray only when the ink on the paper is completely dry.
❏ Do not load documents above the MAX fill line. You can load up to 15 sheets of 64 gsm documents.
Epson AcuLaser CX17 Series User’s Guide
Printing Basics 114
To Next Page
Loading...
