Epson AcuLaser CX17 Series User Manual

Lighten2
Makes the fax lighter than the original. Works well with dark print.
Lighten1
Normal *
Works well with standard typed or printed documents.
Darken1
Makes the fax darker than the original. Works well with light print or faint pencil
markings.
Darken2
Inserting a Pause
For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A
pause must be entered in order for the access code to function. For example, enter the access code 9
and then press the Redial/Pause button before entering the telephone number. “-” appears on the
LCD panel to indicate when a pause is entered.
Sending a Fax Automatically
1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See Also:
❏ “Loading an Original Document on the ADF” on page 218
❏ “Loading an Original Document on the Document Glass” on page 219
2. Press the
(Fax) button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏ “Resolution” on page 220
❏ “Lighten/Darken” on page 221
4. You can select a fax number in one of the following ways:
❏ Select Fax to, and then press the
button. Select Keypad, and then press the button.
Enter the fax number of the remote fax machine using the numeric keypad, and then press the
button.
Epson AcuLaser CX17 Series User’s Guide
Faxing (Epson AcuLaser CX17NF/CX17WF Only) 222

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English