5. If necessary, customize the copy settings including the number of copies, copy size, and image

quality.

See Also:

“Setting Copy Options” on page 160

6. Press the

(Start) button to begin copying.

Sharpness

You can adjust the sharpness to make the copy sharper or softer than the original.

1. For the Epson AcuLaser CX17NF/CX17WF, load the document(s) face up with top edge in first

into the ADF or place a single document face down on the document glass, and close the document

cover.

For the Epson AcuLaser CX17, place a single document face down on the document glass, and

close the document cover.

See Also:

❏ “Making Copies From the ADF (Epson AcuLaser CX17NF/CX17WF Only)” on page 159

❏ “Making Copies From the Document Glass” on page 157

2. Press the

(Copy) button.

3. Select Sharpness, and then press the

button.

4. Select the desired settings, and then press the

button.

Note:

Values marked by an asterisk (*) are the factory default menu settings.

Sharpest

Makes the copy sharper than the original.

Sharper

Normal*

Does not make the copy sharper or softer than the original.

Softer

Makes the copy softer than the original.

Softest

Epson AcuLaser CX17 Series User’s Guide

Copying 168

Epson AcuLaser CX17 Series User Manual

Other manuals for Epson AcuLaser CX17 Series