Epson AcuLaser CX17 Series User Manual

Making Copies From the ADF (Epson AcuLaser CX17NF/CX17WF Only)
Important:
Do not load more than 15 sheets into the ADF or allow more than 15 sheets to be fed to the document
output tray. The document output tray should be emptied before it exceeds 15 sheets or your original
documents may be damaged.
Note:
❏ To get the best scan quality, especially for color or gray scale images, use the document glass instead of
the ADF.
❏ A computer connection is not required for copying.
❏ You cannot load the following documents in the ADF. Be sure to place them on the document glass.
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper
To make copy from the ADF:
1. Load up to 15 sheets of 64 gsm documents face up on the ADF with top edge of the documents in
first. Then adjust the document guides to the correct document size.
Note:
Ensure that you use the document guides before copying a legal-size document.
2. Press the
(Copy) button.
Epson AcuLaser CX17 Series User’s Guide
Copying 159

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English