Epson AcuLaser CX17 Series User Manual

Chapter 10
Troubleshooting
Clearing Jams
Careful selection of appropriate print media and proper loading allow you to avoid most jams.
See Also:
❏ “About Print Media” on page 113
❏ “Supported Print Media” on page 116
Note:
Before buying large quantities of any print media, it is recommended that you try a sample first.
Avoiding Jams
❏ Use only recommended print media.
❏ See “Loading Print Media in the Multipurpose Feeder (MPF)” on page 119 and “Loading Print
Media in the Priority Sheet Inserter (PSI)” on page 127 to load print media properly.
❏ Do not overload the print media sources. Ensure that the stacked print media does not exceed the
maximum height indicated on the paper width guides.
❏ Do not load wrinkled, creased, damp, or curled print media.
❏ Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try
feeding one sheet at a time through the MPF or the PSI.
❏ Do not use print media that you have cut or trimmed.
❏ Do not mix print media sizes, weights, or types in the same print media source.
❏ Ensure that the recommended print side is face up when you insert the print media.
❏ Keep print media stored in an acceptable environment.
❏ Do not remove the PSI during a print job.
❏ Ensure that all cables that connect to the printer are correctly attached.
Epson AcuLaser CX17 Series User’s Guide
Troubleshooting 301

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English