Epson AcuLaser CX17 Series - Setting Sounds; Speaker Volume; Ringer Volume

❏ Turn off the computer modem’s fax-receive feature.
❏ Do not use the computer modem if your printer is sending or receiving a fax.
❏ Follow the instructions provided with your computer modem and fax application to fax via the
computer modem.
Setting Sounds
Speaker Volume
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Fax Settings, and then press the
button.
4. Select Line Monitor, and then press the
button.
5. Select the desired volume, and then press the
button.
6. Reboot the printer by turning the power switch off and then on.
Ringer Volume
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Fax Settings, and then press the
button.
4. Select Ring Tone Volume, and then press the
button.
5. Select the desired volume, and then press the
button.
6. Reboot the printer by turning the power switch off and then on.
Epson AcuLaser CX17 Series User’s Guide
Faxing (Epson AcuLaser CX17NF/CX17WF Only) 243