Storing Consumables
Store consumables in their original packaging until you need to use them. Do not store consumables
in:
❏ Temperatures greater than 40 ˚C (140 ˚F).
❏ An environment with extreme changes in humidity or temperature.
❏ Direct sunlight.
❏ Dusty places.
❏ A car for a long period of time.
❏ An environment where corrosive gases are present.
❏ An environment with salty air.
Managing the Printer
Checking or Managing the Printer with EpsonNet Config (Epson AcuLaser
CX17NF/CX17W Only)
When the printer is installed in a TCP/IP environment, you can check printer status and configure
settings using a web browser on a network computer. You can also use EpsonNet Config to check the
remaining volume of consumables and the paper loaded in this printer.
Note:
When using the printer as a local printer, you cannot use EpsonNet Config. For details about checking
the status of a local printer, refer to “Checking Printer Status with Status Monitor (Windows Only)” on
page 370.
Starting EpsonNet Config
Use the following procedure to start EpsonNet Config.
1. Launch your web browser.
2. Enter the IP address of the printer in the address bar.
Epson AcuLaser CX17 Series User’s Guide
Maintenance 369