1. Open the file you want to send by fax.
2. Open the print dialog box from the application, and then select your fax driver.
3. Click Preferences.
4. Specify the fax settings. For more information, click Help of the driver.
Note:
The settings done here are only applied to a single fax job.
5. Click OK to close the Printing Preferences dialog box.
6. Click Print.
The Set / Check Fax Transmission dialog box appears.
7. Specify the destination for the recipient in one of the following ways:
Epson AcuLaser CX17 Series User’s Guide
Faxing (Epson AcuLaser CX17NF/CX17WF Only) 227
To Next Page
Loading...
