Epson AcuLaser CX17 Series - Page 259

Auto Ans. Ans/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external answering
machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds.
The default is 21 seconds.
Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
Off
Turns off the volume of the line monitor.
Min
Sets the volume of the line monitor.
Middle*
Max
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Turns off the volume of the ring tone.
Min
Sets the volume of the ring tone.
Middle
Max*
Line Type
Purpose:
To select the line type.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 259