Epson AcuLaser CX17 Series - Page 274

Adjust ColorRegi
Purpose:
To automatically adjust color registration.
Color registration adjustment need to be made during the initial setup of the printer or when the
printer is moved to a different location.
Values:
Auto Adjust Yes
Automatically corrects color registration.
No*
Does not correct color registration automatically.
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Yes
Stirs the toner in a new toner cartridge.
No*
Does not stir the toner in a new toner cartridge.
Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in a
new toner cartridge.
Values:
Yellow Yes
Cleans the toner in the yellow toner cartridge.
No*
Does not clean the toner in the yellow toner cartridge.
Magenta Yes
Cleans the toner in the magenta toner cartridge.
No*
Does not clean the toner in the magenta toner cartridge.
Cyan Yes
Cleans the toner in the cyan toner cartridge.
No*
Does not clean the toner in the cyan toner cartridge.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 274