Epson AcuLaser CX17:
System Section Yes
Initializes the system parameters.
No*
Does not initialize the system parameters.
Non-Genuine Mode
Purpose:
To use toner cartridge of another manufacturer.
Note:
❏ Using non-genuine toner cartridges may make some printer features unusable, reduce print quality
and decrease the reliability of your printer. Epson recommends only new Epson brand toner
cartridges for your printer. Epson does not provide warranty coverage for problems caused by using
consumables not supplied by Epson.
❏ Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
Off*
Does not use toner cartridge of another manufacturer.
On
Uses toner cartridge of another manufacturer.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the printer is being used.
Note:
An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining
toner.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 276
To Next Page
Loading...
