Epson AcuLaser CX17 Series User Manual

Color Balance B
Purpose:
To specify the default color balance level of blue within the range of -2 to +2. The factory default menu
setting is 0.
Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.
Note:
This option is effective only for black and white copying.
N-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Does not perform N-Up printing.
Auto
Automatically reduces the original pages to fit onto one sheet of paper.
ID Card Copy
Prints the original pages onto one sheet of paper in the original size.
Manual
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 284

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English