Epson AcuLaser CX17 Series - Page 288

Normal*
Works well with standard type or printed documents.
Darken1
Makes the scanned image darker than the original. Works well with
light print or faint pencil markings.
Darken2
Sharpness
Purpose:
To set the default sharpness level.
Values:
Sharpest
Makes the scanned image sharper than the original.
Sharper
Normal*
Does not make the scanned image sharper or softer than the original.
Softer
Makes the scanned image softer than the original.
Softest
Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
Off
Does not suppress the background.
On*
Suppresses the background of the original to enhance text on the
scanned image.
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
2mm*/0.1 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 288