Epson AcuLaser CX17 Series User Manual

Lower
Sets the image compression level to Lower.
Max E-Mail Size (Epson AcuLaser CX17NF/CX17WF Only)
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes.
The default is 2048 K bytes.
Fax Defaults (Epson AcuLaser CX17NF/CX17WF Only)
Use the Fax Defaults menus to configure a variety of fax features.
Note:
❏ The Fax service cannot be used unless you set up a region under Region. If Region is not set up, a
message Set The Region Code appears on the LCD panel.
❏ Values marked by an asterisk (*) are the factory default menu settings.
Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
Standard*
Suitable for documents with normal sized characters.
Fine
Suitable for documents containing small characters or thin lines or documents
printed using a dot-matrix printer.
Super Fine
Suitable for documents containing extremely fine detail. The Super Fine mode
is enabled only if the remote machine also supports the super fine resolution.
See the notes below.
Ultra Fine
Suitable for documents containing photographic images.
Note:
Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving
device.
Document Type
Purpose:
To select the default document type.
Epson AcuLaser CX17 Series User’s Guide
Using the Operator Panel Menus and Keypad 290

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English