Epson AcuLaser CX17 Series User Manual

Problem Action
Color registration is out of alignment. Execute auto color registration adjustment.
1. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2. Deselect the check box next to On.
3. Click the Start button next to Auto Correct.
Clean the CTD sensor.
1. Clean the CTD sensor.
2. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
3. Deselect the check box next to On.
4. Click the Start button next to Auto Correct.
See Also:
“Cleaning the Color Toner Density (CTD) Sensor” on page 361
Print the color registration chart and manually correct the color registration.
1. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2. Deselect the check box next to On.
3. Click the Start button next to Print Color Regi Chart.
The color registration chart is printed.
4. Check the values with the straight lines on the chart.
5. Select the value for each color on the Printer Setting Utility.
6. Click the Apply New Settings button.
7. Click the Start button next to Print Color Regi Chart to print the color
registration chart again.
8. Adjust till all straight lines are at the value of 0.
See Also:
“Adjusting Color Registration” on page 331
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Epson AcuLaser CX17 Series User’s Guide
Troubleshooting 328

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English