Error Code What You Can Do
031-594 Press the
button to clear the message. Contact your server administrator to check if the scanned file
has wrong setting while being stored to FTP server. If this does not solve the problem, contact the Epson
local representative office or an authorised dealer.
See Also:
“Contacting Epson Support” on page 377
031-598 Press the
button to clear the message. Check if the FTP server encounters any write-protection or disk
problem.
033-503 Press the
button to clear the message. Check the report. Delete the unnecessary data stored in the
memory.
033-513
033-517 Press the
button to clear the message. Check if the password of the fax lock is correct.
033-518 Press the
button to clear the message. Check if your region is set correctly.
033-519 Fax service is locked. To continue, press the
button and disable the fax lock.
See Also:
“Limiting Access to Printer Operations” on page 297
033-787 Press the
button to clear the message. The job is cancelled.
033-788 Press the
button to clear the message. Remove the received fax, or wait for a while until sending a fax is
completed.
034-700 Press the
button to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
❏ Check if the phone line is connected properly.
❏ Check if the destination number is correct.
❏ Set Number of Redial to the largest value.
❏ Set Interval Timer or Redial Delay longer.
See Also:
“Connecting the Telephone Line” on page 214
034-701
034-702
034-703 Press the
button to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
❏ Check if the phone line is connected properly.
❏ Check if the destination number is available and correct.
❏ Set Number of Redial to the largest value.
❏ Set Interval Timer or Redial Delay longer.
See Also:
“Connecting the Telephone Line” on page 214
034-704
034-705
034-706
Epson AcuLaser CX17 Series User’s Guide
Troubleshooting 345