Epson AcuLaser CX17 Series - Page 98

4. Click Install driver.
5. Click Continue in the User Account Control dialog box.
Wait until the driver is copied from the server to the client computer. A new printer object is added
to the Printers folder. The duration of this procedure may vary based on the network traffic.
6. Print a test page to verify installation.
a
Click Start — Control Panel — Hardware and Sound.
b
Select Printers.
c
Right-click the printer you just created and select Properties.
d
On the General tab, click Print Test Page.
When a test page is printed successfully, installation is complete.
For Windows Server 2008 and Windows Server 2008 64-bit Edition
1. Click Start — Network.
2. Locate the host name of the server computer, and then double-click the host name.
3. Right-click the shared printer name, and then click Connect.
4. Click Install driver.
5. Wait until the driver is copied from the server to the client computer. A new printer object will be
added to the Printers folder. The time taken for these activities varies based on network traffic.
6. Print a test page to verify installation.
a
Click Start — Control Panel.
b
Select Hardware and Sound.
c
Select Printers.
d
Right-click the printer you just created and select Properties.
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 98