c
Important:
o Never use alcohol, thinner, or any corrosive solvent to clean the scanner. Deformation or discoloration may occur.
o Never spray any liquid or lubricant on the scanner. Damage to equipment or circuits may cause abnormal
operations.
o Never open the scanner case.
1.
Open the ADF.
2. Use a so, dry, clean cloth to clean the surface of the scanner glass.
c
Important:
o Do not place too much force on the glass surface.
o Do not use a brush or a hard
stu.
Any scratches on the glass may
aect
the scan quality.
o If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of
glass cleaner on a so cloth to remove it. Wipe o all remaining liquid.
o Do not use the Epson cleaning kit for the glass surface.
3. Close the ADF.
User's Guide
Maintenance
67