23
Preparing the Computer
Put the Computer into Network Connection Status
To use a computer on a network LAN you need to make certain settings.
If the settings have already been made, the following settings are not
necessary.
For Windows
Make connection settings for the computer by using the utility software
supplied with the LAN card. For more information on the utility software,
see the user’s guides supplied with your LAN card.
For Macintosh
This section explains how to make settings for the connected port.
For more details on setting the network port, see the user’s guides for your
computer and the Air Mac card (setting the network).
A
From the Apple menu, select "System Preferences"
- "Network".
The network settings screen is displayed.
B
Select the port used in "Port Configurations" and
click "Apply Now".
C
Close the screen.
Installing the EasyMP Software
Install EMP NS Connection supplied with the EasyMP Software. For
details on the installation method, see "Preparing the Computer" in the
Wireless LAN Quick Connection Guide.
Procedure
q
When "Location" is set, all network settings can be
changed at the same time by choosing a target destination.
To Next Page
Loading...
Need help?
General
