Connecting in Wireless LAN Advanced Connection Mode
33
Connecting with the Projector
A
Click "Automatic search".
The projector’s search results are displayed.
When the projector you want to connect to is not displayed
s p.36
B
Select the projector you want to connect to. You can
connect up to four projectors at the same time.
C
Click the "Connect" button.
Automatic search You can search for available projectors on the network
system that the computer is connected to.
Manual search You can search for the specified projector’s IP address
or the projector’s name.
Profile You can search by using information (Profile)
previously saved.
Save list You can save the projector information displayed as a
Profile. Profiles p.38
Clear list You can clear the list displayed.
Disable interrupt
connection
You can use disable interrupt connection to prevent
other computers connecting.
Use multi-display Select this when using Multi-screen display. When this
is selected, "Display layout" and "Display properties"
are displayed at the bottom of the screen. Multi-screen
display s p.16
Display layout You can display the arrangement set on the computers
"Display properties" screen. The arrangement cannot
be changed here. Click the "Display properties" button
to change the arrangement.
Display properties You can display the "Display properties" screen and
change the settings.
Procedure
To Next Page
Loading...
Need help?
General
