PC Free Basic Operations
55
f Closing PC Free
A
Tilt the [h] button on the remote control up to point
the cursor to the "Exit" button.
B
Press the [Enter] button on the remote control.
PC Free shuts down and the following screen is displayed.
C
After turning off the power supply to the digital
camera or the USB storage device, disconnect it
from the projector’s [USB Type A] port.
Guide Mode and Quick Mode
In Guide Mode, when the folder and the file are selected, the sub menu to
specify the next operation is displayed.
In Quick Mode, file projection starts immediately without displaying the
sub menu. When the folder is selected, the folder opens.
"Guide Mode" is the default setting. In Guide Mode and Quick Mode, the
following operations differ.
When a folder is selected and the [Enter] button is pressed
Procedure
q
If you leave the USB storage device connected when you
close PC Free and the EasyMP standby screen is displayed,
disconnect the USB storage device and reconnect it before
starting PC Free again.
For Guide Mode For Quick Mode
The following sub menus are displayed. The folder opens.
Open Folder
Play Slideshow s p.62
Options s p.64
To Next Page
Loading...
Need help?
General
