a
Project the image you want to save as the User's Logo, and then
press the [Menu] button.
s "Configuration Menu Operations" p.136
b
Select User's Logo from Extended.
a
When you select User's Logo, settings such as Geometry
Correction, E-Zoom, Aspect, Scale, and Screen Type are
temporarily disabled.
c
Select Start Setting, and then press the [ ] button.
The confirmation screen is displayed.
d
Select Yes, and then press the [ ] button.
e
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
Select Reset to delete the image you registered and return to the
default settings.
Projection Functions
105
To Next Page
Loading...
