Epson EB-L1075U - Restrictions on Content Playback Mode

a
When using the Effect feature, you need to run Refresh Mode
periodically.
s
Reset - Refresh Mode p.162
a
Press the [Menu] button while Content Playback mode is enabled,
select [Settings], and then press the [
] button.
b
Select Overlay Effect from Content Playback, and then press the
[
] button.
c
Set Overlay Effect to On, and then press the [ ] button.
d
Select Shape Filter, and then press the [ ] button.
e
Adjust the following items as necessary.
• Shape: Select the shape of the effect from Circle, Square, or
Custom.
a
You can register your favorite images to Custom using Epson
Projector Content Manager. See the "Epson Projector Content
Manager Operation Guide" for details.
• Filter Effect: Select whether to mask the inside or the outside of
the selected shape.
• Size: Set the size of the selected shape.
• Position: Set the display position of the selected shape.
f
Select Color Filter, and then press the [ ] button.
g
Adjust the following items as necessary.
• Color Filter: Select the color of the effect.
• Custom: Adjust the Red, Green, and Blue.
h
Select Lightness to set the brightness of the effect.
i
Press the [Menu] button to finish making settings.
Restrictions on Content Playback Mode
Operating restrictions
You cannot change the following operations or settings in Content Playback
mode.
Content Playback Feature
108