Input Port Name Input Source Number
USB 41
LAN 52
HDBaseT 56
• Manufacturer name displayed for "Manufacture name information query"
EPSON
• Model name displayed for "Product name information query"
EPSON L1075U/L1070U
EPSON L1065U/L1060U
EPSON L1050U
EPSON L1070W
EPSON L1060W
EPSON L1070
About Crestron Connected
®
Crestron Connected
®
is an integrated control system provided by
Crestron
®
. It can be used to monitor and control multiple devices
connected on a network.
The projector supports the control protocol, and can therefore be used in a
system built with Crestron Connected
®
.
Visit the Crestron
®
Web site for details on Crestron Connected
®
. (Only
English-language displays are supported.)
https://www.crestron.com/products/line/crestron-connected
The following provides an overview of Crestron Connected
®
.
• Remote operation using a Web browser
You can operate a projector from your computer just like using a remote
control.
• Monitoring and control with application software
You can use Crestron RoomView
®
Express/Crestron Fusion
®
provided
by Crestron
®
to monitor devices in the system, to communicate with the
help desk, and to send emergency messages.
This manual describes how to perform operations on your computer using
a Web browser.
a
• You can only enter single-byte alphanumeric characters and symbols.
• The Message Broadcasting feature for Epson Projector Management
is unavailable while using Crestron Connected
®
.
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode p.146
Operating a projector from your computer
Displaying the operation window
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
• Set Crestron Connected to On from the Network menu.
s Network - Others - Crestron Connected p.159
a
Start the Web browser on the computer.
Monitoring and Controlling
228
To Next Page
Loading...
