Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
s "Setting Password Protection" p.115
Submenu Function
Wireless Mode
Set this to Wireless LAN On when connecting the projector and
a computer via a wireless LAN. If you do not want to connect via
wireless LAN, turn it Off to prevent unauthorized access by
others.
Submenu Function
Net. Info. - Wire-
less LAN
Displays the following network setting status information.
• Connection Mode
• Wireless LAN system
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code
When IPv6 is selected, the following information is displayed.
• IPv6 Address (Manual):
IPv6 Address, Prefix Length, Gateway Address
• IPv6 Address (Auto):
Temporary Address, Link-local Address, Stateless Address,
Stateful Address
Net. Info. - Wired
LAN
Displays the following network setting status information.
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• IPv6 Address (Manual):
IPv6 Address, Prefix Length, Gateway Address
• IPv6 Address (Auto):
Temporary Address, Link-local Address, Stateless Address,
Stateful Address
Display the QR
Code
When connecting iOS or Android devices using Epson
iProjection, read the QR code displayed.
List of Functions
151
To Next Page
Loading...
