Epson EB-L1075U - Part Names and Functions; Front;Top

The illustrations in this guide show the lens unit attached to the projector.
Front/Top
Name Function
A
Air intake vent
Takes in air to cool the projector internally.
Name Function
B
Projection lens
Images are projected through here.
Warning
Do not look into the lens while projecting. This
could cause damage to eyesight due to the power‐
ful light emitted.
Caution
When shifting the lens, do not put your hands near
the lens unit. Your fingers may get caught between
the lens unit and the projector, and cause an in‐
jury.
C
Remote Receiver
Receives signals from the remote control.
D
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector.
s "Reading the Indicators" p.175
E
Air intake vent
(air filter)
Takes in air to cool the projector internally.
s "Cleaning the Air Filter and Air Intake Vent" p.204
F
USB-A port
• Allows you to install the optional wireless LAN unit and
connect the projector to the network.
• Allows you to connect a commercially available USB
flash drive and play the playlist in Content Playback
mode.
G
Wireless LAN indicator
Indicates the access status to the optional wireless LAN
unit.
s "Optional Accessories and Consumables" p.233
H
Cable cover
Cover for the port connectors section at the rear to protect
connected cables.
s "Attaching the Cable Cover" p.55
Part Names and Functions
15