e
Close the air filter cover and tighten the fixing screws.
Attaching the Cable Cover
By attaching the cable cover, you can hide the connected cables giving a
nice, clean finish to the projector installation. (The illustrations are of a
projector installed on a ceiling.)
Warning
Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.
Attaching
a
Run a commercially available cable tie through the cable holder
and tie the cables together.
b
Attach the cable cover to the projector by routing the cables
through the grooves in the cable cover.
Connecting Equipment
55
To Next Page
Loading...
