Submenu Function
Version Main
Video2
Sub
Sub2
HDMI
HDBaseT
HDBaseT2
Displays the projector's firmware version
information.
Status Information
Displays the projector's status.
s "Reading the Status Display" p.182
Temp Warning Info
Displays a high temperature warning. When
you select Detail when a Warning or Error
is displayed, you can check detailed logs for
before and after the error was detected.
Power On/Off History
Displays the power on/off logs.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and
above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All Memo-
ries
Resets all names and settings saved in Memory, Lens Position,
and Geometry Correction.
s "Memory Function" p.110
Refresh Mode
Make settings related to the Refresh Mode.
• Timer: Select when to run Refresh Mode.
• Messages: Select whether or not to display messages during
refresh operations.
• Start: Removes any afterimages (screen burn-in) that remain
in the projected image. The projector turns off once the set
time has elapsed. When you press any button on the control
panel or remote control, a message is displayed asking if you
want to continue using Refresh Mode.
List of Functions
162
To Next Page
Loading...
