Problems with Content Playback Mode
Cannot play the playlist
Check Remedy
Is Content Playback set to On?Set Content Playback to On, and then restart the projector. You can only play playlists on USB flash drives in Content
Playback mode.
s Settings - Content Playback - Content Playback p.143
Are there any playlists on the USB flash drive? Make sure the USB flash drive contains a playlist. See the "Epson Projector Content Manager Operation Guide" for
details on creating playlists.
Is the USB flash drive connected to the projector? Make sure the USB flash drive is connected directly to the projector. Do not use a multicard reader or a USB hub.
Is the USB flash drive partitioned? If the USB flash drive is partitioned, you may not be able to play back playlists. Delete all of the partitions before saving the
playlists on the USB flash drive.
Are you playing the same playlist on projectors with different
resolutions?
Do not share a playlist between projectors that are different in resolution. Color and shape effects added by using
Overlay Effect may not be reproduced correctly.
s
Settings - Content Playback - Overlay Effect p.143
Other Problems
There are afterimages (screen burn-in) in the projected image
Check Remedy
Are you using Refresh Mode? You can remove afterimages (screen burn-in) from the projected image by using Refresh Mode. Select Start
from Refresh Mode in the Reset menu.
s Reset - Refresh Mode p.162
Problem Solving
197
To Next Page
Loading...
