a
• After selecting Preset 1 to Preset 5, you can fine tune each
setting individually. The setting after adjustment will be
overwritten.
• The setting after adjustment will be overwritten separately
when 4K Enhancement is enabled and disabled.
c
Press the [Esc] button to return to the previous screen.
Frame Interpolation
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
a
You cannot set Frame Interpolation in the following situations.
• When 4K Enhancement is enabled
• When a signal with a resolution that exceeds WUXGA is input
• When Aspect is set to V-Zoom
• When Scale is set to Auto or Manual
• When Edge Blending is set to On
a
Select Frame Interpolation from Image Enhancement, and then
press the [
] button.
b
Select the level of interpolation from Low, Normal or High.
Set to Off if noise occurs after setting them.
c
Press the [Menu] button to finish making settings.
Adjusting the Projected Images
85
To Next Page
Loading...
