Home Screen
You can use the Home screen to easily select input sources or frequently
used functions. The Home screen is displayed in the following situations.
• When the [
] button on the remote control is pressed
• When the projector is turned on while Home Screen Auto Disp. is set
to On
s Extended - Home Screen - Home Screen Auto Disp. p.146
• When there is no signal from the selected input source when the
projector is turned on
When the Home screen is displayed, use the [
][ ][ ][ ] buttons on
the control panel or remote control to select an item, and then press the
[
] button.
To hide the Home screen, press the [
] button on the remote control
again.
A
Select the input source that you want to project.
B
Displays the Connection Guide. You can check which wireless connection method to
use for your device.
C
Indicates that the projector is in Content Playback mode.
D
Displays the Help screen.
s "Using the Help" p.173
E
Displays the Configuration menu.
F
Executes the function assigned to Custom Function 1 or Custom Function 2 in the
Extended menu.
s Extended - Home Screen - Custom Function 1, Custom Function 2 p.146
G
Select Light Source Mode.
s "Setting the Brightness" p.77
H
Select Color Mode.
s "Selecting the Projection Quality (Selecting Color Mode)" p.76
a
The Home screen disappears after 10 minutes of inactivity.
Turning On the Projector
59
To Next Page
Loading...
