Remote Control
Name Function
A
[ ] button
Turns the projector on.
B
[t] button
Turns the projector off.
C
Change input buttons
Changes to images from each input port.
s "Switching to the Target Image by Remote Control"
p.62
The [SDI] button is unavailable.
D
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.80
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.
F
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.103
G
[Test Pattern] button
Displays a test pattern.
s "Displaying the Test Pattern" p.33
H
[Lens Shift] button
Press to adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens
Shift Adjustment)" p.34
If pressed for more than three seconds, the lens position
moves to the home position.
I
[Zoom] button
Press to adjust the zoom.
s "Adjusting the Image Size" p.37
J
[Menu] button
Displays and closes the Configuration menu.
s "Configuration Menu Operations" p.136
Part Names and Functions
20
To Next Page
Loading...
