Category Item Status Display Explanation
Signal Information 5V Detect Detected Displays the detection results of 5V signals.
Not Detect
TMDS Clock − Displays the TMDS frequency of the current input signal.
H-Frequency − Displays the horizontal frequency of the current input signal.
V-Frequency − Displays the vertical frequency of the current input signal.
DetChg 5CFHMP123 − Displays the factors of signal changes.
Stable Time − Displays the operating time since the input source is determined.
HDCP Status Non-HDCP Displays the HDCP status.
Passed
Failed
HDCP Ri −
HDCP AKSV −
HDCP An −
HDCP Ver − Displays the HDCP version.
AVI VIC − Displays the VIC information (AVI) of the current input signal.
AVI Checksum OK Displays the checksum result for AVI.
NG
AVI Sampling Str RGB4:4:4 Displays color sampling for AVI.
YCbCr4:4:4
YCbCr4:2:2
YCbCr4:2:0
Signal Mode HDMI Displays the signal mode.
DVI
EDID Mode − Displays the EDID mode.
HDBaseT Level − You can display the image signal information from the HDBaseT port.
Reading the Status Display
186
To Next Page
Loading...
