"If this setting is changed, the image may be distorted." is displayed,
press the [
] button again.
d
Select Point Correction, and then press the [ ] button.
e
Select Point Correction, and then press the [ ] button.
Point Correction
Select the point number (3x3, 5x5, 9x9, 17x17),
and then make the Point Correction setting.
Pattern Color
Select the color of the grid when performing
corrections.
Reset
Resets all corrections for Point Correction to their
default values.
f
Select the point number (3x3, 5x5, 9x9, or 17x17), and then press
the [
] button.
a
If you reduce the number of points during correction,
corrections at the position without a point are reset.
Adjusting the Projected Images
75
To Next Page
Loading...
