After this, if the tone for some areas do not match, adjust them by
Area Correction.
f
Press the [Esc] button, to return to the screen displayed in step
2.
g
Select Area Correction, and then press the [ ] button.
h
Select Start Adjustments, and then press the [ ] button.
Boundary lines that indicate areas where images overlap are
displayed.
The boundary lines are displayed based on the settings for Top
Edge/Bottom Edge/Right Edge/Left Edge.
i
Use the [ ][ ][ ][ ] buttons to select a boundary line of the
area you want to adjust.
The selected line is displayed in orange.
j
Press the [ ] button to confirm the selection.
Multi-Projection Function
95
To Next Page
Loading...
