B
Lamp 2
D
Install the new lamp.
Insert the lamp along the guide rail in the correct direction so that it
fits in place and press it firmly to the back. Pull down the lock lever
until it clicks into place.
E
Replace the lamp cover.
Press the cover against the unit and slide it to the right until it
clicks.
Attention
•
Make sure you install the lamp securely. If the lamp cover is removed, the
lamps turn off automatically as a safety precaution. If the lamp or the lamp
cover is not installed correctly, the lamp will not turn on.
•
This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose of
it with normal waste.
Resetting the Lamp Hours
The projector records how long the lamps are turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing the
lamps and turning on the power, the following message is displayed on the
screen and you can reset the lamp-hour counter.
Replacing Consumables
103
To Next Page
Loading...
Need help?
General
