Epson EB-Z8355WUNL User Manual

G Move the [h] button to the point you want to correct, then
press the [Enter] button.
Remote Control
q
If the [Esc] button is held down for about two seconds while selecting
the point, the confirm default reset screen is displayed.
Select "Yes" to reset the result of Point Correction.
H Press the [h] button to correct the distortion.
Remote Control
To continue to correct another point, press the [Esc] button to return
to the previous screen, then repeat the step 7 and 8.
q
If you press the [Default] button while adjusting, the value that you
are adjusting is reset to the default.
I When you are done, press the [Esc] button to exit the
correction menu.
Checking the Color Mode
Set the Color Mode to Multi-Projection.
s
p.28
Settings for Multiple Projectors
154

Epson EB-Z8355WUNL Specifications

General

Brand	Epson
Model	EB-Z8355WUNL
Category	Projector
Language	English