Epson EB-Z8355WUNL - Changing the Aspect Mode (EB-Z8355 W;Z8350 W); Projecting Images from Video Equipment or from the HDMI1;2 Input Port; Projecting Images from a Computer

Aspect mode Input Signal
XGA
1024X768(4:3)
WXGA
1280X800(16:10)
WUXGA
1920X1200(16:10
)
Full
Zoom
Native
q
If parts of the image are missing or it cannot project everything, set
Wide or Normal in Resolution from the configuration menu
depending on the size of the computer panel.
s
p.53
Changing the Aspect Mode (EB-Z8355W/Z8350W)
Projecting images from video equipment or from the HDMI1/2
input port
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Auto, 16:9, 16:9 (Up), 16:9 (Down), Full,
Zoom, and Native.
s p.22
Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)
A
Auto
B
16:9
C
16:9 (Up)
D
16:9 (Down)
E
Full
F
Zoom
G
Native
Projecting images from a computer
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Normal, 16:9, 16:9 (Up), 16:9 (Down), Full,
Zoom, and Native.
s
p.22
Projection examples for each aspect mode are shown below.
Aspect mode Input Signal
XGA
1024X768(4:3)
WXGA
1280X800(16:10)
SXGA
1280X1024(5:4)
Normal
Changing the Aspect Ratio of the Projected Image
24