B
Press the [Menu] button on the remote control or the control
panel.
The Split Screen Setup will be displayed.
q
The Split Screen Setup will also be displayed when the [Source
Search] button is pressed on the remote control or control panel or
when a Source button is pressed on the remote control.
C
Select "Source" and press the [Enter] button.
D
Select each input source for "Left" and "Right".
Only the input sources that can be combined can be selected.
s "Input Sources for Split Screen Projection" p.29
E
Select "Execute" and prses the [Enter] button.
To switch the projected image during split screen projection, start the
procedure from step 2.
q
Analog RGB signals that are output from the left screen can be
displayed on an external monitor. s p.161
Switching the left and right screens
Use the following procedure to switch the images displayed on the left and
right screens.
Procedure
A
Press the [Menu] button on the remote control or the control
panel during split screen projection.
B
Select "Swap Screens" and press the [Enter] button.
The images on the left and right screens will be swapped.
Projecting Two Images Simultaneously (Split Screen)
30
To Next Page
Loading...
Need help?
General
