Procedure
A
During projection, press the [Menu] button and select Settings
- "Control Panel Lock" from the configuration menu.
s "Using
the Configuration Menu" p.47
Using the Remote Control Using the Control Panel
B
Select either "Full Lock" or "Partial Lock" according to your
purpose.
C
Select "Yes" when the confirmation message is displayed.
The control panel buttons are locked according to the setting you
chose.
q
You can release the control panel lock by one of the following two
methods.
• From the remote control, select Off in Settings - Control Panel
Lock from the configuration menu. s p.55
• Press and hold down the [Enter] button on the Control panel for
about seven seconds, a message is displayed and the lock is released.
Lens Operation Lock
This function locks the following buttons on the remote control related to
the lens operation.
Remote Control
Security Functions
41
To Next Page
Loading...
Need help?
General
