Epson EB-Z8355WUNL User Manual

q
• The aspect mode can also be set using Aspect in the Signal menu
from the configuration menu. s p.53
• When Scale on the Signal menu is set to On and Scale Mode is set
to Full Display, you cannot change the aspect mode.
Changing the Aspect Mode (EB-Z8455WU/
Z8450WU)
Projecting images from video equipment or from the HDMI1/2 or
SDI input port
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Auto (Normal when projecting from the SDI
input port), 16:9, 16:9 (Up), 16:9 (Down), Full, Zoom, and Native.
s p.22
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
Auto/Normal
B
16:9
C
16:9 (Up)
D
16:9 (Down)
E
Full
F
Zoom
G
Native
Projecting images from a computer
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Normal, 16:9, 16:9 (Up), 16:9 (Down), Full,
Zoom, and Native.
s p.22
Projection examples for each aspect mode are shown below.
Aspect mode Input Signal
XGA
1024X768(4:3)
WXGA
1280X800(16:10)
WUXGA
1920X1200(16:10
)
Normal
16:9
16:9 (Up)
16:9 (Down)
Changing the Aspect Ratio of the Projected Image
23

Epson EB-Z8355WUNL Specifications

General

Brand	Epson
Model	EB-Z8355WUNL
Category	Projector
Language	English