C
Use the [h] button on the remote control or the [w/ ], [v/
], [
<
/ ], and [
>
/ ] buttons on the control panel to select
the corner you want to adjust, and then press the [Enter]
button.
D
To adjust the shape, use the [h] button on the remote control
or the [
w/ ], [v/ ], [</ ], and [>/ ] buttons on the control
panel.
If the triangle in the direction you are adjusting the shape turns gray,
as shown in the screenshot below, you cannot adjust the shape any
further in that direction.
Adjusting the Projected Image
141
To Next Page
Loading...
