Sub Menu Function
Event ID
When problems occur when the projector and computer are connected through the network, information on the problem is displayed using
an Event ID. Refer to the following page for information on interpreting the Event ID. s p.96
*1 The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.
*2
If you are using EB-Z8455WU/Z8450WU/Z8355W/Z8350W/Z10005/Z10000, it displays the lamp operating times of both power consumption mode and normal mode.
Info Menu (Display Only)
78
To Next Page
Loading...
Need help?
General
