Epson EMP-X5 Service Manual

4-11
EMP-822/EMP-83/EMP-X5/EMP-S5
SEIKO EPSON Revision:A
Optical Engine
Optical Engine and MAB set (2)
(refer to Components of the Optical Engine
and MAB set (p. 40))
Plate Nut PLATE,NUT;M3
PS Air Filter AIR,FILTER,PS
PS Ballast Assy. ps ballast,assy;AS
RC Board Assy.
PRINTED CIRCUIT BOARD ASSEM-
BLY;RC_R1
RC Cable Cable RC;B
RC Filter FILTER,RC
Rear Case CASE,REAR;G
Rear Foot FOOT,REAR
Shutter A SHUTTER;A
Shutter Ball BALL,SHUTTER
Shutter Frame frame,shutter;a
Shutter Sheet sheet,shutter
Shutter Spring SPRING,SHUTTER
Shutter Switch SWITCH,SHUTTER
Speaker Spring Spring Speaker
Speaker(EMP-X/S5 only) Speaker
Speaker Unit(EMP-822/83 only) Speaker Unit
SW Shading Sheet SHEET,SHADING,SW;B
Switch Board Assy.
PRINTED CIRCUIT BOARD ASSEM-
BLY;SW_R2
TH Board Assy.
PRINTED CIRCUIT BOARD ASSEM-
BLY;TH_R1
Upper Case Unit --
Zoom Ring ZOOM RING
Table 4-2. Part Names given in the SPI
Names used this Chapter Official Name used in SPI

Epson EMP-X5 Specifications

General

Resolution	1024 x 768 (XGA)
Contrast Ratio	400:1
Lamp Life	3000 hours (Normal Mode), 4000 hours (Eco Mode)
Display Technology	3LCD
Zoom Ratio	1.2x
Projection Size	30 - 300 inches
Brightness	2200 lumens
Weight	2.7 kg
Inputs	Composite video, S-Video
Noise Level	35 dB (standard), 28 dB (economy)