4. Moisten a cotton swab with the water with a few drops of detergent so that it is not dripping water, and then
wipe the smeared part.
c
Important:
Wi p e
o
the smear gently. If you press the cotton swab too hard to the
lm,
the springs of the
lm
may be
dislocated and the printer may be damaged.
5. Use a new dry cotton swab to wipe the
lm.
c
Important:
Do not leave any
bers
on the
lm.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
6. Repeat steps 4 and 5 until the lm is not smeared.
7. Visually check that the
lm
is not smeared.
Checking the Total Number of Pages Fed Through the
Printer
You can check the total number of pages fed through the printer.
Checking the Total Number of Pages Fed Through the Printer -
Control Panel
e information is printed together with the nozzle check pattern.
1. Load A4-size plain paper in the printer.
2. Select Maintenance on the home screen.
3.
Select Print Head Nozzle Check.
4. Follow the on-screen instructions to print the nozzle check pattern.
User's Guide
Maintaining the Printer
133
To Next Page
Loading...
Need help?
General