Epson ET-M3140 Series User Manual

Left
Oset
in Back:
Adjust the
le
margin for the back of the page when performing 2-sided printing.
Check Paper Width:
Select On to check the paper width before printing.
is
prevents printing beyond the edges of
the paper when the paper size setting is incorrect, but this may lower the print speed.
Skip Blank Page:
Skips blank pages in the print data automatically.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏ O
Displays an error message and cancels printing.
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no dierence in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing.
e
printer prints the
other side aer printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB.
Fax Settings
Select the menu on the control panel as described below.
Settings > General Settings > Fax Settings
See Related Information below.
Related Information
&
“Menu Options for Fax Settings” on page 51
Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
User's Guide
Preparing the Printer
37

Epson ET-M3140 Series Specifications

General

Brand	Epson
Model	ET-M3140 Series
Category	Printer
Language	English