Menu Options for Firmware Version
Select the menus on the control panel as described below.
Settings > Firmware Version
Displays the current
rmware
version of your printer.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will
aect
the product's energy
eciency.
Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it o automatically if it is not
connected for 30 minutes.
Saving Power - Control Panel
1.
Select Settings on the home screen.
2. Select General Settings > Basic Settings.
3. Do one of the following.
Note:
Your product may hav e the Power
O
Settings or Power
O
Ti m e r feature depending on the location of purchase.
❏ Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power O Timer, and then make settings.
User's Guide
Preparing the Printer
40
To Next Page
Loading...
Need help?
General